InnoMaker Raspberry Pi HiFi DAC HAT PCM5122 HiFi DAC Audio Card Expansion Board for Raspberry Pi 4 3 B+ Pi Zero etc. (DAC HAT)
Highlighted Features
- The HiFi DAC Hat compatible with Raspberry Pi 4, Zero, Zero W, 3B, 3B+ with the 40-pin connector. Connects directly to the Raspberry Pi board, no additional cables required, no
- Absolutely perfect to support all Raspberry Pi music playback system, like LibreElec, OSMC, Max2Play, RuneAudio, Volumio, Moode, PiCorePlayer, PiMusicBox, OpenELEC, Debian, Ubuntu etc. Support playing music from a hard disk
- Class-leading stereo audio DAC PCM5122, sample rates up to 384-KHz/32-Bit. Paired with stereo high fidelity headphone amplifier TPA6133. Provides 2.1Vrms ground-centered outputs coupled with Film
- On-board a pair of gold plated RCA (LEFT &Right) jacks and a 3.5mm high-end headphone jack output, allow you free to play your music through Raspberry Pi to another
- Comes with software, document and friendly technology support. For more information, please refer to our wiki（view the link on color page comes with the
Features
Information
- Best Choice – #1 Best Pi Dac
- Checked on 08/10/2024
- Based on 38 Reviews
HiFi DAC+Sound Card Pifi DAC + PCM5122 DAC I2S Interface Analogue Output Signal Digital Audio Card Compatible with Raspberry Pi B + a + 2B Raspberry Pi 3B (64-bit)
Highlighted Features
- Good performance: PCM5122 integrates a negative charge pump, and the output does not require a DC blocking capacitor; 2.1 Vrms grounded center output; very good ability to suppress noise in
- Ensure the continuity of signal impedance: Sound card Pifi DAC’s gold-plated RCV double clip and gold-plated 3.5 mm jack socket (recommended by amplifier). It is perfectly compatible with the official
- Pifi DAC + PCM5122 DAC: Pifi DAC + PCM5122 DAC, I2S interface, analog output signal, compatible with Raspberry Pi B + a + 2B Raspberry Pi 3B (64 bit). Provide
- Get rid of the current sound: The RPI+DAC HiFi kit uses an insulated power supply design to isolate the Raspberry Pi nutrition from the DAC part of the independent power
- Provide status display: Stereo audio DAC PCM5122 adds a two-color LED to provide status display, red is DAC power indicator (power is normally on), green is DAC light status (decoding
Features
Information
- Best Choice – #2 Best Pi Dac
- Checked on 08/10/2024
- Based on 30 Reviews
Acrylic Case for InnoMaker DAC Hat HiFi Audio Module Works with Raspberry Pi 4 3B+ 3B 3
Highlighted Features
- Packing List: 1 x Acrylic Case; 5 Group
- Acrylic Case for innomaker HiFi DAC HAT only, Not support innomaker DAC PRO Hat and other brand DAC
- Acrylic Case support Pi4/Pi3
- There are protection film on both sides of all acrylic plate. You need to peel it off before assembling the
- For the case assemble,Please refer to the DAC hat
Features
Information
- Best Choice – #3 Best Pi Dac
- Checked on 08/10/2024
- Based on 55 Reviews
RASPIAUDIO Audio DAC Hat Sound Card (Audio+V2) for Raspberry PI4 All Models Pi Zero / Pi3 / Pi3B / Pi3B+ / Pi2 / Better Quality Than USB
Highlighted Features
- The Audio+ V2 works with Raspberry Pi 4 or Raspberry Pi Zero version
- The Audio+ V2 works with previous version of Raspberry pi 3 and 2 or Raspberry Pi Zero version
- The Audio+ V2 is fully compatible with the Audio+
- The Audio+ V2 is now using a very high quality no noise dac 112dB Audio Stereo DAC with 32-bit 384kHz
- Compatible with VOLUMIO / Raspberry pi OS / Retropie /
Features
Information
- Best Choice – #4 Best Pi Dac
- Checked on 08/10/2024
- Based on 40 Reviews
Geekworm DACPi Ultra-Thin Audio Player Kit for Raspberry Pi 4 Model B, NUC Style Aluminum Alloy Case|X950 PCM5122 DAC| Passive Cooling Embedded Heatsink for Raspberry Pi 4B
Highlighted Features
- 【DACPi Aluminum Case】Ultra-Thin NUC Aluminum Alloy Case, specially designed for Raspberry Pi, reseved all interface of Pi
- 【X950 DAC Shield】 Uses a Texas Instruments PCM5122 DAC to deliver stereo analogue audio to a pair of phono connectors, and also provides a dedicated headphone amplifier, supporting 24‑bit 192kHz
- 【Cooling Solution】Considering that the cooling fan will interfere with the sound quality, only use P165-B embedded heatsink to dissipate heat, which can provide good heat dissipation if there is no
- 【How to Power】 5Vdc +/-5% , ≥3A (Via Type-C of Pi 4); (Recommended to use Geekworm UL listed 5V 4A Type-C power
- 【Compatibility】Only for Raspberry Pi 4 (NOT include Pi 4 board), compatible with Volumio, Rune, OSMC, MoodeAudio, Raspbian Jessie, Openelec
- 【Wifi Description】5G WiFi is stable enough, recommend using Ethernet or 5G WiFi due to metal
Features
Information
- Best Choice – #5 Best Pi Dac
- Checked on 08/10/2024
- Based on 32 Reviews
HiFiBerry DAC+ ADC Pro
Highlighted Features
- Connects directly to the Raspberry Pi, no additional cables or additional power supply
- Gold plated RCA output
- Comes with all components required to mount it. We include 4 M2.5x12mm spacers to fix the board onto the Raspberry
- Audio input might require Linux kernel update (at least version
- Hardware volume control for DAC and ADC. You can control the input and output parameters using “alsamixer” or any application that supports ALSA mixer
Features
Information
- Best Choice – #6 Best Pi Dac
- Checked on 08/10/2024
- Based on 82 Reviews
HiLetgo PCM5102 I2S IIS High Quality Lossless Digital Audio DAC Decoder Module Stereo DAC Digital-to-Analog Converter Voice Module for Arduino Raspberry Pi
Highlighted Features
- 1.The DAC Module provides a super affordable high-quality DAC for the Raspberry
- 2.Since it’s digital audio, it sounds really good, much better than the onboard analog
- 3.The stereo jack comes soldered onto the board
- 4.Uses the PCM5102A DAC to work with the Raspberry Pi I2S
- 5.Since it’s digital audio, it sounds really good, much better than the onboard analog audio. The stereo jack comes soldered onto the board
Features
Information
- Best Choice – #7 Best Pi Dac
- Checked on 08/10/2024
- Based on 15 Reviews
Geekworm Raspberry Pi 4B/3B+/3B Full-HD DAC I2S Class-D TI PCM5122 Amplifier, X400 V3.0 Audio Expansion Board Sound Card | Music Player for Raspberry Pi 4 Model B/Raspberry Pi 3 Model B+ / 3 Model A+
Highlighted Features
- Onboard RCA connectors, 3.5mm stereo headphone jack, speaker & power screw terminals, and gold-plated high-current DC power
- Wide range voltage 6V-26V input, it provides up to 60W power. Power supply request: 6-26Vdc，( >=3A is
- With manual volume adjustment switch; User manual refer to Geekworm WiKi search
- Built in High quality Class-D stereo audio amplifier (TI TPA3118D2) & audio headphone amplifier (TI
- Matching Metal Case for X400 V3.0 and PI 4B refer to ASIN: B07ZRNNB29. (Case out of
Features
Information
- Best Choice – #8 Best Pi Dac
- Checked on 08/10/2024
- Based on 17 Reviews
Raspberry Pi Expansion Board Raspberry Pi HiFi DAC+ HD Audio PCM5122 24 bit Expansion Board for Raspberry Pi 3 Model B / 2B /B+/A+/ Raspberry Pi Zero W
Highlighted Features
- With DAC All function PCM5122 chip and I2S Input, X920 DAC+ board is a perfect HiFi / DAC+ / HIFI / Full HD audio expansion board for Raspberry Pi 3
- After using X920 board, User can coordinate with the broadcast system (such as Volumio, RuneAudio, OSMC, XMBC(Kodi), MOODE etc.) to set up your own HIFI player
- X920 is available with RCA, 3.5mm phone jack output connectors and built in IR receiver (Vishay
- Full HD audio up to 24 bit/192kHz playback and Class leading audio (112db SNR, and 93db THD) function, Integrated hardware volume control with TI’s LP5907 Ultralow Noise voltage regulator for
- Powered by Raspberry Pi, no external power requirements, Conforms to the Raspberry Pi hardware attached on top (HAT)
Features
Information
- Best Choice – #9 Best Pi Dac
- Checked on 08/10/2024
- Based on 11 Reviews
Comidox 4PCS MCP4725 Breakout Module I2C DAC 12Bit Development Board 2.7V to 5.5V Supply with EEPROM for Arduino Raspberry Pi
Highlighted Features
- The MCP4725 is a single-channel 12-bit buffered voltage output DAC with non-volatile memory (EEPROM) that allows you to store configuration register bits (2 bits) and DAC input data (12 bits)
- The DAC allows you to send analog signals, such as sine waves, from a digital source such as the I2C interface on an Arduino microcontroller. Digital to analog converters are
- This version of the CJMCU-MCP4725 Breakout solves some of the board’s problems, including IC packages, I2C pinouts, changing the overall board size to better suit your project, and some minor
- The board breaks down each pin you need to access and uses the MCP4725 (including GND and signal OUT pins) to connect to the oscilloscope or any other device you
- If you want more than one MCP4725 on the bus, you can disable the pull-up resistors on this
Features
Information
- Best Choice – #10 Best Pi Dac
- Checked on 08/10/2024
- Based on 40 Reviews
LT3045 5A-5V (Vadj) ultra low noise Linear PSU for Raspberry Pi and SBC BARE PCB
Information
- Category: Amplifier Parts & Components
- Price: 15 USD
LT3045 5A-5V (Vadj) ultra low noise Linear PSU for Raspberry Pi and SBC
Information
- Category: Amplifier Parts & Components
- Price: 125 USD
Leave a Reply
You must be logged in to post a comment.